item + discription |
price |
clickable image |
Soup Ceramique MK-IV with 30mm diamond tweeters Matched pair 2.5-way loudspeakers • Accuton BD30-6-036 diamond tweeters • C90-6-089 ceramic midwoofers • C220-6-221 ceramic woofers • extreme high-end crossovers with components such as Mundorf VT390 transformer inductors and Intertechnik Audyn True Copper capacitors • WBT-0710Cu Nextgen binding posts • Furutech internal wiring • Walnut veneer • Nero Assoluto bases and shipping crates included • for sale by a private customer in Hamburg, Germany. Your inquiries will be forwarded. |
EUR. 7.900,- per pair |
 |
Faital Pro HF1440 1.4 inch compression driver 3.4" (86 mm) voice coil; wide frequency range from 700Hz to 20kHz, ideal for two-way systems; very linear frequency response gives a neutral and natural sound; neodymium magnet circuit; Ketone polymer diaphragm; flux density 2.2 Tesla • 8 ohms impedance. |
 |
 |
AudioQuest Earth RCA interlink • ex-demo 72V DBS system • Solid Perfect Surface Copper+ conductors • FEP Air-Tube Dielectric • Carbon-Based 6-Layer Noise-Dissipation System • Triple-Balanced Geometry (separate ground-reference conductor) • Cold-welded, hanging-silver plating directly over high-purity red copper terminations • length 2x 100cm • still in perfect condition complete with original packaging. |
EUR. 699,- incl. VAT
EUR. 577,69 excl. VAT |
 |
AudioQuest Coffee RCA digital interlink • ex-demo 72V DBS system • Solid 10% Silver Conductors • Hard-Cell Foam Insulation • Carbon-Based 6-Layer Noise-Dissipation System • Silver-Plated Braid Shield • Cold-welded, hanging-silver plating directly over high-purity red copper terminations • length 1x 100cm • still in perfect condition complete with original packaging. |
EUR. 450,- incl. VAT
EUR. 371,90 excl. VAT |
 |
Monacor SPH-300CTC • carbon fibre woofer • NEW 12" carbon fibre cone woofer; dual voice coils 2 x 8 ohms; diecast basket; huge magnet; 18Hz resonance frequency. |
 |
 |
Jantzen Audio MOX resistors, 10 watts • all values • NEW High quality foil-based audio grade resistors that offer great performance at a very affordable price point. Now with 50% discount! Available as 10 watts in nearly all values from 1,0 ohms to 150 ohms. Colour grey • more information can be found here • hundreds to sell, available as long as stock lasts. |
EUR. 0,65 incl. VAT each
EUR. 0,54 excl. VAT |
 |
AudioQuest NRG-1 powercord • ex-demo Solid Long Grain Copper conductors • Star-Quad Helical Hyperlitz configuration • length 90cm • still in perfect condition complete with original packaging. |
 |
 |
Audioquest Jitterbug, the "no-brainer" USB filter • NEW • complete with original Audioquest packaging. |
 |
 |
Faital Pro LTH102 1 inch throat horn • NEW Aluminium horn for compression drivers with 1" inch exit • external dimensions 235mm x 189mm; entry dimension 1 inch; horn dispersion 60 x 50°; cut-off frequency 1000Hz; depth 172mm • 2 new items to sell • download the datasheet |
EUR. 75,- incl. VAT each
EUR. 61,98 excl. VAT |
 |
Faital Pro LTH142 1,4 inch throat horn • NEW ABS horn for compression drivers with 1,4" inch exit • external dimensions 320mm x 240mm; entry dimension 1.4 inch; horn dispersion 60 x 50°; cut-off frequency 800Hz; depth 233mm. |
 |
 |
BMS 2230 2 inch throat horn • NEW Fiberglass horn for compression drivers with 2 inch exit • external dimensions 229mm x 319mm; mounting dimensions 195mm x 240mm; entry dimension 2.0 inch; horn dispersion 90°; cut-off frequency 700Hz; depth 120mm • 2 new items to sell • download the datasheet |
EUR. 75,- incl. VAT each
EUR. 61,98 excl. VAT |
 |
P-Audio PH-3220 1 inch throat horn • NEW The PH-3220 is an ideal choice for use in high level two way 12 inch or 15 inch system designs. The rectangular mouth geometry allows for a wide horizontal coverage and the mouth horizontal dimension maintains excellent coverage control to below 1000Hz • external dimensions 320mm x 200mm; entry dimension 1 inch; horn dispersion 100 x 60°; cut-off frequency 500Hz; depth 209mm. |
 |
 |
P-Audio SC-1096 1 inch throat horn • NEW The SC-1096 is a bolt on horn with a 1 inch (25.4mm) throat diameter. It is a wide bandwidth constant directivity waveguide designed for use in very high performance designs • nominal coverage angle 90 x 60 degrees • cut-off frequency 800Hz • 2 new items to sell • download the datasheet |
EUR. 22,- incl. VAT each
EUR. 18,18 excl. VAT |
 |
P-Audio PH-2735 1 inch throat horn • NEW The PH 2735 is a high impact glass filled ABS design and is fully braced to provide both excellent structural support for the driver and superior mechanical damping • external dimensions 350mm x 270mm; entry dimension 1 inch; horn dispersion 90 x 60°; cut-off frequency 500Hz; depth 200mm • 4 new items to sell • download the datasheet |
EUR. 33,- incl. VAT each
EUR. 27,27 excl. VAT |
 |
Mc Gee HL-1018 biradial horn • NEW • front dimensions 465 x 245 mm, overall depth 220mm; screw-on type fitting 34,9 mm (1 3/8"); weight 1,2 kg. |
 |
 |
Behringer U-Control UC222 • used USB Audio Interface • 48kHz converters, 2x RCA in/out, headphone connector 3.5 mm with adjustable volume, Optical S/PDIF output with direct conversion, Bus-powered, plug and play on Windows or Mac.
In perfect working order, visually in good condition. Complete with original packaging and user manual. |
EUR. 15,- incl. VAT
EUR. 12,40 excl. VAT |
 |
Tama Rhythm Watch RW105 • used Drum Metronome • Can be mounted on cymbal stand (holder included); 1/4-1/8-1/16 triplets individually adjustable; tempo adjustable from 30-250 BPM; tap function; input for mains adapter; stereo output for headphones; input for footswitch; can be used with battery (not included). In perfect working order, visually in good condition. Complete with mounting bracket, soft transport case (never used), original packaging and user manual. |
EUR. 49,- incl. VAT
EUR. 40,50 excl. VAT |
 |
Boss RCE-10 • used Digital Chorus Ensemble • In perfect working order, visually in very good condition, especially considering the vintage. From the good old days, built to last - Made in Japan. Complete with original packaging and user manual! |
EUR. 189,- incl. VAT
EUR. 156,20 excl. VAT |
 |
Boss RCL-10 • used Compressor Limiter • In perfect working order, visually in very good condition, especially considering the vintage. From the good old days, built to last - Made in Japan. Complete with original packaging and user manual! |
EUR. 189,- incl. VAT
EUR. 156,20 excl. VAT |
 |
Faital Pro W6N8-120 • NEW paper cone midwoofer • fast, open and dynamic character • 16 ohms impedance; BL = 13N/A; Kapton voice-coil former; triple roll treated polycotton surround; neodynium ringmagnet • 2 new items to sell • download the datasheet |
EUR. 99,- incl. VAT each
EUR. 81,82 excl. VAT |
 |
Faital Pro 6PR160 paper cone midwoofer • fast, open and dynamic character • 8 ohms impedance; BL = 11N/A; Glass Fiber voice-coil former; triple roll treated polycotton surround; neodynium ringmagnet • 2 items to sell • used for test purposes only; including original packaging • download the datasheet |
EUR. 99,- incl. VAT each
EUR. 81,82 excl. VAT |
 |
RCF ND950 2.0 compression driver • NEW (open box) The ND950 2.0 is a high performance 4.0-inch diaphragm compression driver with a 2.0 inch exit throat and high power neodymium magnet • 4.0 inch; Kapton former; edge wound aluminium voice coil; frequency range: 500Hz - 20kHz; titanium dome; Mylar surround. |
 |
 |
SB Acoustics SB26STC-C000-4 • NEW textile dome tweeter • 4 ohms impedance • copper cap for reduced voice coil inductance; non-reflective rear chamber with optimized damping; flow optimized vented pole piece; CCAW voice coil for low moving mass; long life silver lead wires; low resonance frequency 2 new items to sell • download the datasheet |
EUR. 25,- incl. VAT each
EUR. 20,66 excl. VAT |
 |
SB Acoustics SATORI TW29R-B • NEW Ringradiator tweeter • 4 ohms impedance • aluminium faceplate with integrated mechanical decoupling; dual copper caps for minimum voice coil inductance; non-reflective cast aluminium chamber with optimized damping for improved dynamics; CCAW voice coil for low moving mass; long life silver lead wires. |
 |
 |
SB Acoustics SB17NBAC35-8 • NEW High quality black aluminum cone midwoofer • 8 ohms impedance • vented cast aluminum chassis; soft low damping rubber surround for improved transient response; non-conducting fibre glass voice coil former; extended copper sleeve on pole piece for low inductance and low distortion; CCAW voice coil for reduced moving mass; long life silver lead wires • 14 new items to sell • download the datasheet |
EUR. 49,- incl. VAT each
EUR. 40,50 excl. VAT |
 |
SEAS SP22R - H9945 • NEW SP22R is a passive radiator intended for use as an alternative to the port in a bass reflex cabinet; In many applications, the traditional bass reflex port may produce high speed air noise or even have poor effect due to a small port area or a large port length. In such cases, a passive radiator may bring about an improvement • download the datasheet |
 |
 |
Ciare 10.50W midwoofer • used The 10.50W is a high quality 10-inch midwoofer • 8 ohms impedance • one used item to sell • download the datasheet |
EUR. 35,- incl. VAT
EUR. 28,93 excl. VAT |
 |
18 Sound 15MB1000 midwoofer • NEW 15-inch midwoofer with low profile, carbon fiber reinforced, smooth curvilinear cone. The 100mm aluminum voice coil with Interleaved Sandwich Voice coil technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and energy • 8 ohms impedance • one brand new pair to sell • download the datasheet |
EUR. 239,- incl. VAT each
EUR. 197,52 excl. VAT |
 |
Monacor SP-170PA midwoofer • used Fs = 48Hz • Qms = 4,64 • Qes = 0,3 • Qts = 0,32 • Mms = 17 grammes • Bl = 9,6 • Vas = 17 litres • Rdc = 6,2 ohms • Le = 0,60mH • Kapton voice coil former • one used pair to sell, still in very good condition |
EUR. 25,- incl. VAT each
EUR. 20,66 excl. VAT |
 |
Monacor WG-300 waveguide • NEW Special horn front attachment (waveguide) for increase in sound pressure; perfectly matched to dome tweeter DT-300 but other tweeters will also fit. |
 |
 |

HOW TO ORDER
Please send us an e-mail for more information about our products and pricing or for placing an order: info@humblehomemadehifi.com
Please contact us before making any payments. All prices quoted are valid for 30 days from the date of stated on the quotation. Where quotations are given, the price will remain at the agreed price unless additional work is requested by you. Our general price-list is availble as a download in pdf-format: Humble Homemade Hifi General Price List. All pricing is in euro's and includes 21% dutch sales tax. Products sold and shipped outside the EU are free from this sales tax.
HOW TO PAY





When you place an order and you will receive all specified costs plus details for paying. Payments shall be made in advance and may take place by one of the following options:
1) Bank Transfer: Please contact us before making any payments. All transfer details (such as IBAN and BIC/Swift codes) will be supplied with a corresponding proforma invoice. Please assure that all bank and transfer costs are covered at your side. When you use a bank transfer for payments from outside the European Union you will have to make sure that you pay ALL bank transfer costs. When you do the (online) payment, you have to select OUR and not SHARED (else our bank will charge us € 12,- for each payment). If you can't select OUR, you will have to add the extra € 12,- to the total amount. All payments shall be carried out in Euro's. Customers inside The Netherlands will receive an iDEAL payment link.
2) PayPal: Please contact us before making any payments. We will send you a PayPal Money Request with a corresponding proforma invoice. PayPal charges money for every transfer, therefore 4% extra costs will be added to the total to cover fees that Paypal debits from our account.
3) Pick-up at Humble Homemade Hifi: it is possible to pick-up your goods personally. This can be done by appointment only.
SHIPPING OPTIONS AND COSTS
Delivery time and shipping-costs depend on the size and weight of the shipment, the country of destination and the chosen shipment options. We will kindy supply you with all the details and options. We ship with PostNL, UPS, DPD, DHL or GLS. A tracking number will be included in your dispatch confirmation e-mail. All shipments should be inspected upon delivery. Any damages incurred during shipping should be immediatly claimed to the carrier. All shipments are insured as standard. International shipments can only be insured for the declared customs value of your order. Please contact us about pricing before making any payments.






No part of this website may be reproduced in any form without written or e-mail consent from the author. The designs are free to use for private DIY-purposes only, commercial use is strictly prohibited. Humble Homemade Hifi is a subsidiary of tg-acoustics - Chamber of Commerce 37138402 - The Netherlands
© Copyright Humble Homemade Hifi

Last updated 13.3.2023